Home > Products > Knitting Machines > NSES122CS
TWO ORIGINAL TECHNOLOGIES FOR IDEAL COARSE GAUGE KNITTING.
The "CS" moniker of the NSES122CS stands for "Compound-Sinker" which symbolizes the marriage of two unique SHIMA SEIKI technologies resulting in ideal coarse gauge knitting. Compound needles are used for their short stroke and high stability suited for coarse gauge applications, while our patented spring-type sinker system greatly increases pattern variety and at the same time assures gentle fabric holddown. Other features specifically developed for coarse gauge knitting such as the double racking mechanism, as well as brand new features such as the R2CARRIAGE and built-in controller enhance NSES122CS's capabilities, helping it to maintain its position as the industry benchmark for high-quality coarse gauge shaped knitting.
| Type | NSES122CS |
|---|---|
| Gauge | 3･ 4 ･ 5 |
| Knitting width | Variable stroke. Max 48" (122cm) |
| Knitting speed | Max 1.1m/sec. Knitting speed varies according to gauge and knitting condition. Variably adjustable speed levels. 10 additional programmable speeds. |
| Stitch density | 120 levels, electronically controlled. |
| Racking | Motor-driven. Double racking. Max 5-pitch racking in each direction (10-pitch total) for front and rear needle beds (4G: 6-pitch racking in each direction, 12-pitch total).1/2 and 1/4 pitch also available from any position. |
| Knitting system | Double KNITRAN system. Single R2CARRIAGE system. |
| Transfer | Simultaneous transfer, front or back, independent of carriage direction. Split stitch possible without exchanging yarn carriers. |
| Sinker system | Spring-type moveable full-sinker system for gentle yarn handling. |
| Stitch presser | Special motor-driven system allows individual on/off. |
| Needle selection | Full jacquard selection via special solenoid actuators |
| Setup device | Takedown comb with special setup needles |
| Takedown device | Main/sub rollers. Changeable 99 levels, automatically adjustable on each level. Automatic opening and closing. |
| Yarn cutter | Single-unit system includes 1 yarn cutter and 2 yarn grippers. Left side standard (1). |
| DSCS | Consistent loop length by digital control method. 8 encoders. Left side standard. |
| Yarn feed roller | 8 positions on left side standard (2). |
| Side tension | 12 on each side |
| Yarn carriers(3) | 9 carriers |
| Top tensions | 24 tension devices |
| One-touch easy threading. Large knots cause machine stop. Small knots cause 0-9 courses at specified knot detection speed, then automatically resume at set speed. | |
| Stop motion | Yarn break, large knot, wraparound check, shock detection, piece count, over-torque, program error, etc. |
| Drive system | Belt drive. AC servo motor. No lubrication necessary. |
| Cleaner | Special blower operated cleaner |
| Safety devices | Full safety cover for noise-suppression and dust-proofing with stop motion sensor and interlock mechanism. Emergency stop switch. Emergency power off device. Ultra-low speed "crawl" setting. CE Mark. Indicator lamps (see below). |
| Operation lamp | Green / normal operation. Flashing green / normal stop. Flashing amber / abnormal stop. |
| Data input | USB memory interface. Ethernet 10 / 100 BASE - T network interface. |
|---|---|
| Pattern memory | 25,165,824 bits (1,024 wales x 8,192 addresses) |
| Control system | Built-in controller. Stored program for flat knitting machine. |
| Control display | Monochrome LCD panel. Editing possible via display panel operation. Available in English, French, Italian, Spanish, Portuguese, German, Turkish, Arabic, Russian, Chinese, Korean and Japanese. |
| Back-up power | Power supply for resuming knitting after power failure |
| Power | Single phase AC220V+/-10% |
| 2.0KVA |
- OPTIONS:
- (1) Right side yarn cutter
- (2) Right side yarn feed roller.
- (3) Intarsia device.
| SES122CS 3G&4G | SES122CS 5G | |
| Kg ( lbs. ) | 1,020 ( 2,244 ) | 980 ( 2,156 ) |
