Home > Products > Knitting Machines > SSR112
Satisfaction Through a New Sense of Value
SHIMA SEIKI's SSR inherits the know-how and experience accumulated over the years as the leading manufacturer of computerized flat knitting machines. Productivity is increased with a maximum knitting speed of 1.2 meters per second, as well as with the R2CARRIAGE System that achieves quicker carriage returns. It also carries over proven SHIMA SEIKI technology such as our renowned Digital Stitch Control System (DSCS), spring-loaded Full-Sinker System, Stitch Presser, Yarn Gripper and Cutter and Takedown Comb. Made-in-Japan quality, reliability, productivity, user-friendliness and cost-performance combine to satisfy the high expectations of the world's fashion industry.
| Type | SSR112 | |
|---|---|---|
| Variation | SV | SC |
| Gauge | 7 ･ 12 ･ 14 | 7 ･ 12 ･ 14 ･ 16 |
| Knitting width | Variable stroke, max 45" (114cm) | |
| WideGauge | Wide range of gauge knit on a single machine (SV only). | |
| Knitting speed | Max 1.2m/sec. Knitting speed varies according to gauge and knitting condition. Variably adjustable speed levels. 10 additional programmable speeds. | |
| Stitch density | 120 levels, electronically controlled | |
| Racking | Motor-driven. Max 2-inch racking. 1/2 and1/4 pitch also available from any position. | |
| Knitting system | Double KNITRAN system, single carriage (R2CARRIAGE system) | |
| Transfer | Simultaneous transfer, front or back, independent of carriage direction. Split stitch possible. | |
| Sinker system | Spring-type moveable full-sinker system. Provides gentle holddown instead of forcibly pressing down yarn. v-Sinker standard on 14G and 16G. | |
| Stitch presser | Special motor-drive. On/off adjustment. Press-down amount can also be set according to knit, transfer, etc. | |
| Needle hook conversion | Conversion between LL-size and MM-size possible without exchanging cams (SV only). | |
| Needle selection | Full jacquard selection via special solenoid actuators | |
| Setup device | Takedown comb with special setup needles | |
| Takedown device | Main rollers. Changeable 99 levels, automatically adjustable on each level. Automatic opening and closing. | |
| Yarn cutter | Single-unit system includes 1 yarn cutter and 2 yarn grippers. Left side standard. | |
| DSCS | Digital Stitch Control System. Consistent loop length by digital control method. 4 lightweight, compact encoders. Left side standard. | |
| Yarn feed roller | 6 positions (7G only: 10 positions) on left side standard. | 6 positions on left side standard. |
| Side tensions | 8 on each side (SV7G: 12 on each side). Brake disk with multi-step adjustable dials. Both sides standard. | |
| Yarn carriers | 7 normal carriers. Plating yarn feeders standard on carrier rails no. 5 and no. 6 (7G only: 9 normal carriers). | |
| Top tension | 10 units (7G only: 16 units) | 10 units |
| One-touch easy threading. Large knots cause machine stop. Small knots cause 0-9 courses at specified knot detection speed, then automatically resume at set speed. | ||
| Stop motion | Yarn break, large knot, wraparound check, shock detection, piece count, over-torque, program error, etc. | |
| Drive system | Belt drive. AC servo motor. No lubrication necessary. | |
| Safety devices | Full safety cover for noise-suppression and dust-proofing with stop motion sensor and interlock mechanism. Emergency stop switch. Emergency power off device. Ultra-low speed "crawl" setting. CE Mark. Operation lamp (see below). | |
| Operation lamp | Green/normal operation. Flashing green/normal stop. Flashing amber/abnormal stop. | |
| Data input | USB memory interface. Ethernet 10/100 BASE-T network interface. |
|---|---|
| Pattern memory | 25,165,824 bits (1,024 wales x 8,192 addresses) |
| Control unit | Built-in controller. Stored program for flat knitting machine. |
| Control display | Monochrome LCD panel. Editing possible via display panel operation. Help/Message function (for cleaning and lubrication). Available in English, French, Italian, Spanish, Portuguese, Turkish, Arabic, Russian, Chinese, Korean and Japanese. |
| Back-up power | Power supply for resuming knitting after power failure. |
| Power | Single phase AC220V/230V (200V-250V) |
| 1.6kVA (0.5～1.0kW: Power consumption varies according to gauge and knitting condition) |
| SSR112 | |
| Kg ( lbs. ) | 660 ( 1,452 ) |
