Home > Products > Knitting Machines > SVR123SP
Raising the Benchmark With New Loop Pressers
SHIMA SEIKI's SVR-series continues to inherit the DNA of innovative technology that makes it the global standard in computerized shaping machines. Now with loop pressers, SVR123SP is capable of producing unprecedented designs in knit fabrics, especially inlay patterns, which combine knit and weave characteristics to produce hybrid textiles. SVR123SP carries over established SHIMA SEIKI technology such as the R2CARRIAGE System, Digital Stitch Control System (DSCS), spring-loaded moveable sinker system, stitch presser, takedown comb and yarn gripper and cutter system. Proven technology, along with Made-in-Japan quality, reliability, productivity, user-friendliness and increased patterning capability all combine to satisfy the high expectations of the world's fashion industry.
| Type | SVR123SP |
|---|---|
| Variation | SV |
| Gauge | 12・14 |
| Knitting width | Variable stroke, max 48" (122cm) |
| WideGauge | Wide range of gauge knit on a single machine. |
| Knitting speed | Max 1.4m/sec. Knitting speed varies according to yarn and other knitting conditions. Speed can be programmed for 10 separate categories. |
| Stitch density | 120 levels, electronically controlled. |
| Racking | Motor-driven. Max 1-inch racking to each side (2 inches total). 1/2 and1/4 pitch also available from any position. |
| Knitting system | Triple KNITRAN system, single carriage (R2CARRIAGE system) |
| Transfer | Simultaneous transfer, front or back, independent of carriage direction. Split stitch possible by exchanging yarn carriers. |
| Sinker system | Spring-type moveable full-sinker system. |
| Stitch presser | Special motor-drive. On/off adjustment. Press-down amount can also be set according to knit, transfer, etc. |
| Needle hook conversion | Conversion between LL-size, L-size and MM-size hooks possible without exchanging cams. (SV14) Conversion between LL-size and MM-size hooks possible without exchanging cams. (SV12) |
| Loop presser | Individual selection possible. Positioned on upper rear loop presser bed. |
| Needle selection | Full jacquard selection via special solenoid actuators. |
| Setup device | Takedown comb with special setup needles. |
| Takedown device | Main/sub rollers. Changeable 99 levels, automatically adjustable on each level. Automatic opening and closing upon command. |
| Yarn cutter | Single-unit system includes 1 yarn cutter and 2 yarn grippers. Left side standard.(1) |
| DSCS | Digital Stitch Control System. Consistent loop length by digital control method. 8 lightweight, compact encoders. Left side standard. |
| Yarn feed roller | 10 positions on left side.(2) |
| Side tensions | 12 on each side.(2) Brake disk with multi-step adjustable dials. Both sides standard. |
| Yarn carriers | 16 normal carriers, 2 inlay carriers (accessory) |
| Top tensions | 24 units. (2) One-touch easy threading. Large knots cause machine stop. Small knots cause 0-9 courses at specified knot detection speed, then automatically resume at set speed. |
| Supplemental yarn stand | Optional (3) |
| Stop motion | Yarn break, large knot, fabric pileup, shock detection, piece count, over-torque, program error, etc. |
| Drive system | Belt drive. AC servo motor. No lubrication necessary. |
| Cleaner | Air for needle bed gap cleaner. Front carriage only. |
| Safety devices | Full safety cover for noise-suppression and dust-proofing with stop motion sensor and interlock mechanism. Emergency stop switch. Emergency power off device. Ultra-low speed "crawl" setting. CE Mark. Operation lamp (see below). |
| Operation lamp | Green/normal operation. Flashing green/normal stop. Flashing amber/abnormal stop. |
| Data input | USB memory interface. Ethernet 10/100 BASE-T network interface. |
|---|---|
| Pattern memory | 25,165,824 bits (1,024 wales x 8,192 addresses) |
| Control unit | Built-in controller. Stored program for flat knitting machine. |
| Control display | Monochrome LCD panel. Editing possible via display panel operation. Help/Message function (for cleaning and lubrication). Available in English, French, Italian, Spanish, Portuguese, Turkish, Arabic, Russian, Chinese, Korean, Vietnamese and Japanese. |
| Back-up power | Power supply for resuming knitting after power failure. |
| Power | Single phase AC220V/230V (200V-250V) |
| 2.2kVA (0.6-1.2kW: Power consumption varies according to knitting condition) |
- OPTIONS:
- (1) Right side yarn cutter.
- (2) Side tension (16 on each side) + Right side yarn feed roller + Top tension (8 additional units).
- (3) Supplemental yarn stand: 8 (1 row on top) or 16 (2 rows on bottom)
| SVR123SP | |
| Kg ( lbs. ) | 855 ( 1,881 ) |
